Castor/Zuse at Gallifrey!
I got all the final bits finished in time, and here are some fabulous photos from Gallifrey One!
(Most of these are courtesy of Linda Wenzelburger… Thanks!)
I got all the final bits finished in time, and here are some fabulous photos from Gallifrey One!
(Most of these are courtesy of Linda Wenzelburger… Thanks!)
First, after cutting the foam (with appropriate bevels), I preshaped it slightly with the heat gun, then edge glued the sub assemblies (there are 5 in the pattern for each side of the head, then glued those into the two halves, and finally glued the center seam joining the two halves. After heat forming and…
I glued the fur to the headbase Monday Night, and trimmed the excess fur away from the eyeholes, mouth, and underside of the head.I also stitched up a new nose (more dimensional) from some lightweight leather and stitched it on.I’m experienting with the teeth atm; they’re glued to a small piece of fabric tape so…
Bill will be adding details of his Bullwinkle build as time and opportunity present
This weekend I set out to build Rocky’s tail. It’s quite long/tall (extends above his head in many animation frames), and I want the costume to be generally huggable, so I needed it to be soft. I detailed previously my decision to laminate NuFoam stabilized fiberfill with an inner piece of EVA to give it…
The one thing I was REALLY unhappy with in my Pinky Pie outfit for the performance was the pink booty shorts. They managed to be a little too baggy in the legs, too tight in the waist, plus the whole malformed zipper fly. This is no doubt why they ended up in the “meh” bin…
Had a board meeting, so only got a tiny bit more done — upper big teeth and building out the lower jaw a little.