Modifying the neckline and lapels. The new closure works well, but the result still looked like a (cheap) tailcoat. After a bit of soul searching, I cut off the lapels and reseamed the edges to a smooth line, and trimmed the top of the “waistcoat” down to a square line (at the top of the…
The goal is to achieve something reminiscent of Michael Sheen’s costume as Castor/Zuse in Tron: Legacy. Without having to build a frockcoat from scratch. I started with a very inexpensive costume “frockcoat” purchased via AliExpress. It was essentially constructed like a labcoat — no lining, made of inexpensive cotton/poly twill, and the “waistcoat” is actually…
Rocky now has goggles! This was a bit of a trial. After making the basic pattern, I started cutting frames to support the lenses out of some 3mm thick heavy cowhide in my stash. It took 3 iterations to get the pattern the right size, as I wanted to wrap it in the light blue…
The sides of Rocky’s aviator cap were a bit poofy when I was done, so I obsessively picked out about 5 inches of each (double stitched) seam and adjusted them. The fit is much nicer now. Goggle Design — patterning Rocky’s goggles are more of a suggestion than functional — they never move from the…
This took three mockups to get right. That was after I’d tried scaling up a commercial pattern (TOO BIG) and starting from a fabric beachball pattern (dimensions did not match description, and it was the wrong shape anyway).The problem basically is that Rocky’s head is basically a squashed basketball shape (not the vertical ovoid of…
Saturday I finally took the time to add the internal band that lets Rocky’s head rest securely on my own.
I want to attempt a Cantor/Zuse costume from Tron Legacy. First there is going to be a quick and dirty version of his illuminated tailcoat. These are pictures of a test lighting of 5 meters of white LED strip from a 5V power bank, using one AdaFruit 12V Boost modul.
Today I cut and made a simple fur cowl to attach to the head and give Rocky a neck without having to attach the head to the fursuit itself. The cowl itself is pretty simple: two identical gores that joined match the inside diameter of the bottom of the head, stitched together for about 2″…
